72 Hours Insulin Travel Case Cooler – Medication Cooler

Explorer - Cooler Storage Capacity for Insulin

• Up to 7 insulin pens: ProtaPhane, Novomix 30/70, Novomix 50, Novolin, Admelog, Toujeo, Soliqua, NovoRapid, Lantus, Insuman, Novolog, Apidra, Actrapid.
• Up to 6 insulin pens: Humalog 200, Lyumjev, Semglee, Humulin NPH, Humalog Mix 50/50, Humalog Mix 75/25, Basaglar, Levemir, Tresiba 200, Tresiba 100, Fiasp, Ryzodeg, Xultophy.

ℹ️ Important Note

This list is not exhaustive. Medication formats and sizes may vary by brand and country. If you don’t see your treatment listed, please check the product images or contact us for personalised guidance — we’re happy to help you choose the right size.

Explorer - Cooler Storage Capacity for GLP-1 & Weight-loss Injections

• Up to 7 injection pens or syringes: Victoza.
• Up to 6 injection pens or syringes: Byetta, Saxenda.
• Up to 5 injection pens or syringes: Ozempic, Wegovy.
• Up to 3 injection pens or syringes: Bydureon BCise, Trulicity, Mounjaro (Tirzepatide), Zepbound.

ℹ️ Important Note

This list is not exhaustive. Medication formats and sizes may vary by brand and country. If you don’t see your treatment listed, please check the product images or contact us for personalised guidance — we’re happy to help you choose the right size.

Explorer - Cooler Storage Capacity for Other Medications

• Up to 7 injection pens or syringes: Tymlos (Abaloparatide).
• Up to 6 injection pens or syringes: Puregon, Benepali, Amgevita 40 mg.
• Up to 5 injection pens or syringes: Repatha, Praluent 75 mg, Aimovig, Enbrel, Gvoke HypoPen, Gonal-F.
• Up to 4 injection pens or syringes: Nutropin, Gemfrac, Actemra, Entyvio, Hyrimoz, Praluent 150 mg.
• Up to 3 injection pens or syringes: Erelzi, Hadlima, Imraldi, Sondelbay, Hulio, Praluent, Humira, Benlysta, Nucala (Mepolizumab).
• Up to 2 injection pens or syringes: Dupixent, Kevzara, Kesimpta, Ajovy, Forteo, Taltz.
• Up to 1 injection pen or syringe: Idacio (Adalimumab), Simponi (Golimumab), Cimzia, Emgality, Tremfya, Skyrizi, Australian Humira, Orencia (Abatacept), Epipen.

ℹ️ Important Note

This list is not exhaustive. Medication formats and sizes may vary by brand and country. If you don’t see your treatment listed, please check the product images or contact us for personalised guidance — we’re happy to help you choose the right size.

Cooler performance on combined mode:

🌡️ At 86°F / 30°C, the USB + Freeze Pack Cooler keeps insulin and medicines refrigerated between 36-46°F / 2-8°C for 52 hours and cool below 79°F / 26°C for 72 hours.

🌡️ At 95°F / 35°C, the USB + Freeze Pack Cooler keeps insulin and medicines refrigerated between 36-46°F / 2-8°C for 50 hours and cool below 79°F / 26°C for 70 hours.

🌡️ At 104°F / 40°C, the USB + Freeze Pack Cooler keeps insulin and medicines refrigerated between 36-46°F / 2-8°C for 48 hours and cool below 79°F / 26°C for 68 hours.

Cooler Performance on Freeze Pack Mode:

🌡️ At 86°F / 30°C, the Freeze Pack Cooler keeps insulin and medicines refrigerated between 36-46°F / 2-8°C for 33 hours, and cool below 79°F / 26°C for 52 hours.

🌡️ At 95°F / 35°C, the Freeze Pack Cooler keeps insulin and medicines refrigerated between 36-46°F 7 2-8°C for 30 hours, and cool below 79°F / 26°C for 48 hours.

🌡️ At 104°F / 40°C, the Freeze Pack Cooler keeps insulin and medicines refrigerated between 36-46°F / 2-8°C for 28 hours, and cool below 79°F / 26°C for 46 hours.

Cooler Performance on USB Only:

The USB lid alone cannot maintain refrigerated temperatures for insulin and medications. Instead, it is ideal for carrying open and in-use medicines cool and protected from heat, ensuring they remain at room temperature below the threshold of 79°F / 26°C.

This function operates efficiently in environments with ambient temperatures of 86°F / 30°C, delivering the following cooling performance:

🌡️ At 86°F / 30°C, the USB Insulin Cooler effectively lowers the internal temperature to 25°F / 15°C compared to the external temperature. This consistent cooling mechanism maintains interior temperatures between 46-79°F / 8-26°C for as long as it is plugged into a power source.

Unlocking the full potential of the Explorer travel cooler is all about utilizing its flexible three-in-one cooling technology. Whether you're powered by USB, using cold packs, or combining both, this cooler adapts to your travel needs with ease.

• USB-Powered: Ideal for road trips or office use, just connect the cooler to any USB port to keep your medications cold.
• Cold Packs: Perfect for longer periods without power, these packs keep your medications cold, no matter where you are.
• Combined Method: Use both the USB power and cold packs for maximum cooling efficiency and duration.
  

Here’s a guide on how to use each of its three cooling methods and understand the cooling performance you can expect.

1. DUAL COOLER MODE: COLD PACK + USB FOR MAXIMUM EFFICIENCY

Harness the combined strength of the Biogel Cold Pack and USB Power Lid to keep your medications cold for up to three days.

1. Prepare the Biogel Cold Pack: Shake the Biogel cold pack several times to ensure even distribution of the gel.
2. Freeze the Biogel Cold Pack: Place the Biogel cold pack in the freezer for at least 6-8 hours. It's perfectly fine if it stays frozen longer than 8 hours.
3. Submerge In Lukewarm Water: Submerge the cold pack in lukewarm tap water for 2 to 3 minutes. If lukewarm water isn't available, simply leave it at room temperature for 15-20 minutes. This step helps remove any frost from the surface of the pack, preventing direct ice contact and risks of freezing your medication.
4. Dry and Pack: Towel dry the Biogel cold pack thoroughly and place it alongside your insulin or medication inside the travel cooler.
5. Seal and Power Up: Close the Explorer travel cooler with the USB lid and connect it to any available USB power source. Setup is now complete, you’re ready to travel!

2. COLD PACK COOLER MODE

For those times when power sources are out of reach, the Explorer Insulin Travel Case Cooler serves as an exceptionally reliable cold pack cooling case. Whether you're high in the mountains, on a remote camping trip, or simply prefer a lighter travel option without extra batteries, this alternative cooling mode ensures your medications remain chilled and protected.

1. Switch the Lids: Replace the USB lid with the standard lid tailored for cold pack use.
2. Prepare the Biogel Cold Pack: Shake the Biogel cold pack four or five times to ensure even gel distribution.
3. Freeze the Biogel Cold Pack: Place the cold pack in the freezer for 6-8 hours. Leaving it longer is perfectly fine and does not affect its efficacy.
4. Submerge In Lukewarm Water: Submerge the cold pack in lukewarm tap water for 2 to 3 minutes. If lukewarm water isn't available, simply leave it at room temperature for 15-20 minutes. This step helps remove any frost from the surface of the pack, preventing direct ice contact and risks of freezing your medication.
5. Dry and Pack: Dry the Biogel with a towel, then place it and your medications inside the cooler.
6. Seal and Go: Close the Explorer travel cooler with the its regular lid. You’re all set!

Each Explorer Insulin Travel Case Cooler comes equipped with one Biogel cold pack, and additional packs are available for purchase to ensure continuous cooling.

3. USB-POWERED COOLER MODE

The USB lid of the Explorer Insulin Travel Case Cooler is specifically designed for times when you don't need deep refrigeration but still require your in-use medications to stay cool. Ideal for medications that are sensitive to high temperatures or opened, in-use insulin and medical injections, this setting ensures they remain cool below the critical threshold of 26°C.

Optimized Cooling Performance in Moderate Climates:

• Ambient Conditions (30°C): The USB-powered setting effectively reduces the internal temperature by 15°C compared to the external temperature. This consistent cooling mechanism maintains interior temperatures cool between 8-26°C for as long as it is plugged into a power source.

For more refrigeration needs on USB power, check out the Voyager Portable Travel Refrigerator for Insulin and Medicines, which offers extended refrigerated transport and enhanced features.

📏 Dimensions & Internal Capacity

Designed for reliable medical transport with enhanced internal storage, the Explorer offers generous capacity while remaining compact and travel-ready.

External Dimensions

• Height: 9.8 in (25 cm)
• Diameter: 3.3 in (8.4 cm)

Internal Usable Space

• Usable Internal Length: 7.9 in (20 cm)
• Internal Free Space Diameter: 1.93 in (4.9 cm)

The cylindrical chamber is engineered to support stable airflow around your medication, helping maintain consistent temperature performance.

🧊 Biogel Cooling Technology

The Explorer includes an advanced Natural Biogel Ice Pack, specifically formulated for temperature-sensitive medications.

• Freezing point at 36°F (2°C)
• Designed to reduce the risk of accidental medication freezing
• Non-toxic composition
• Natural Biogel formulation
• Fully reusable
  

🌡️ USB Cooling Lid Specifications

The Explorer features a USB-powered lid that enhances cooling performance and expands usage flexibility.

• USB-C port (USB-C to USB-A cable included)
• Functions as a performance enhancer when used with the Biogel ice pack
• Can be used independently to help maintain medications at room temperature when Biogel is not inserted
• Operating noise level: under 40 dB (quiet, sleep-safe level)

This hybrid configuration allows both passive cooling (Biogel) and USB-assisted airflow support.

What’s Included with Your Explorer Travel Cooler

• 1 × Explorer Medical Cooler
• 1 × USB Cooling Lid (active temperature control module)
• 1 × Biogel Ice Pack
• 1 × USB-C Cable
• 1 × Power Adapter

Additional Biogel freeze packs can be purchased here.